Kezdőoldal » Számítástechnika » Programok » Miért nem tudok linuxon dvd-t...

Miért nem tudok linuxon dvd-t írni?

Figyelt kérdés

K3b-vel próbálkoztam és Braseroval... K3b-ből ezt tudtam kimásolni :/ :

Devices

-----------------------

HL-DT-ST DVDRAM GSA-T40N JR03 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

K3b::IsoImager

-----------------------

mkisofs print size result: 875140 (1792286720 bytes)

System

-----------------------

K3b Version: 2.0.1

KDE Version: 4.5.1 (KDE 4.5.1)

QT Version: 4.7.0

Kernel: 2.6.35-28-generic

Used versions

-----------------------

mkisofs: 1.1.10

cdrecord: 1.1.10

cdrecord

-----------------------

/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.

scsidev: '/dev/sr0'

devname: '/dev/sr0'

scsibus: -2 target: -2 lun: -2

Linux sg driver version: 3.5.27

Wodim version: 1.1.10

SCSI buffer size: 64512

Beginning DMA speed test. Set CDR_NODMATEST environment variable if device

communication breaks or freezes immediately after that.

TOC Type: 1 = CD-ROM

Driveropts: 'burnfree'

Device type : Removable CD-ROM

Version : 5

Response Format: 2

Capabilities :

Vendor_info : 'HL-DT-ST'

Identification : 'DVDRAM GSA-T40N '

Revision : 'JR03'

Device seems to be: Generic mmc2 DVD-R/DVD-RW.

Current: 0x0011 (DVD-R sequential recording)

Profile: 0x0012 (DVD-RAM)

Profile: 0x0011 (DVD-R sequential recording) (current)

Profile: 0x0015 (DVD-R/DL sequential recording)

Profile: 0x0016 (DVD-R/DL layer jump recording)

Profile: 0x0014 (DVD-RW sequential recording)

Profile: 0x0013 (DVD-RW restricted overwrite)

Profile: 0x001A (DVD+RW)

Profile: 0x001B (DVD+R)

Profile: 0x002B (DVD+R/DL)

Profile: 0x0010 (DVD-ROM)

Profile: 0x0009 (CD-R)

Profile: 0x000A (CD-RW)

Profile: 0x0008 (CD-ROM)

Profile: 0x0002 (Removable disk)

Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).

Driver flags : SWABAUDIO BURNFREE

Supported modes: PACKET SAO

Drive buf size : 1114112 = 1088 KB

Drive DMA Speed: 13696 kB/s 77x CD 9x DVD

FIFO size : 12582912 = 12288 KB

Speed set to 11080 KB/s

Track 01: data 1709 MB

Total size: 1962 MB (194:28.53) = 875140 sectors

Lout start: 1963 MB (194:30/40) = 875140 sectors

Current Secsize: 2048

HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.

Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1423356

Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.

Last chance to quit, starting real write in 2 seconds.

1 seconds.

0 seconds. Operation starts.

Waiting for reader process to fill input buffer ... input buffer ready.

Performing OPC...

Sending CUE sheet...

Starting new track at sector: 0

Track 01: 0 of 1709 MB written.

Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error

CDB: 2A 00 00 00 00 00 00 00 1F 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 70 00 03 00 00 00 00 0A 32 4D 03 0C 0C 00 00 00

Sense Key: 0x3 Medium Error, Segment 0

Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0

Sense flags: Blk 0 (not valid)

cmd finished after 17.301s timeout 200s

/usr/bin/wodim: A write error occured.

/usr/bin/wodim: Please properly read the error message above.

Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error

CDB: 00 00 00 00 00 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 71 00 03 00 00 00 00 0A 32 4D 03 0C 0C 00 00 00

Sense Key: 0x3 Medium Error, deferred error, Segment 0

Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0

Sense flags: Blk 0 (not valid)

cmd finished after 0.003s timeout 200s

write track data: error after 0 bytes

Writing time: 69.951s

Average write speed 58.1x.

Fixating...

Fixating time: 0.009s

/usr/bin/wodim: fifo had 192 puts and 1 gets.

/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:

-----------------------

/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=875140s -

mkisofs

-----------------------

875140

Warning: -follow-links does not always work correctly; be careful.

I: -input-charset not specified, using utf-8 (detected in locale settings)

0.06% done, estimate finish Thu Mar 24 19:58:00 2011

0.11% done, estimate finish Thu Mar 24 19:43:51 2011

0.17% done, estimate finish Thu Mar 24 19:39:04 2011

0.23% done, estimate finish Thu Mar 24 19:36:35 2011

0.29% done, estimate finish Thu Mar 24 19:35:09 2011

0.34% done, estimate finish Thu Mar 24 19:34:12 2011

0.40% done, estimate finish Thu Mar 24 19:33:30 2011

0.46% done, estimate finish Thu Mar 24 19:32:59 2011

0.52% done, estimate finish Thu Mar 24 19:32:35 2011

0.57% done, estimate finish Thu Mar 24 19:32:15 2011

0.63% done, estimate finish Thu Mar 24 19:32:00 2011

0.69% done, estimate finish Thu Mar 24 19:31:46 2011

mkisofs calculate size command:

-----------------------

/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-user/k3bIA9110.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-user/k3bXV9110.tmp -dvd-video -f /tmp/kde-user/k3bVideoDvd0

mkisofs command:

-----------------------

/usr/bin/genisoimage -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-user/k3bcN9110.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-user/k3biR9110.tmp -dvd-video -f /tmp/kde-user/k3bVideoDvd0

2011. márc. 24. 19:33

1/7 anonim

válasza:

Másold be a terminálba:

sudo chmod 4755 /usr/bin/wodim

És írd be a jelszavad, mikor kéri, ezután próbáld újra.

2011. márc. 24. 20:47

Hasznos számodra ez a válasz?

2/7 anonim

válasza:

Megjegyzés: a chmod után egy három jegyű számnak kell állnia. Tehát az előző válaszában a második ötös elírás, nem kell.

2011. márc. 24. 21:48

Hasznos számodra ez a válasz?

3/7 A kérdező kommentje:

köszi, megpróbáltam, de nem engedi beírni a jelszavamat, elkezdtem gépelni de nem írja... próbáltam bemásolni de azt sem engedi :/

2011. márc. 25. 18:17

4/7 A kérdező kommentje:

Amúgy Brasero-ban ezt dobja ki: SCSI error on write(16,16): [3 0C 00] Write error

2011. márc. 25. 18:20

5/7 anonim

válasza:

Miközben írod a jelszavad, nem fog látszódni, úgy látszik, mintha semmit nem írnál, ez olyan, mint mikor egy jelszó mezőbe írsz, akkor csillagokat ír, hogy ne lássa más, erre szolgál. Tehát csak írd be, enter, és megcsinálja.

2011. márc. 25. 18:24

Hasznos számodra ez a válasz?

6/7 A kérdező kommentje:

jajj nagyon köszi tényleg, hogy ennyit segítetek, de nem igazán oldotta meg, most csak annyit írt ki, hogy hiba történt a lemez írásakor, meg egy log filet lementettem, ez van benne:

Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)

BraseroBurnURI called brasero_job_get_action

BraseroBurnURI called brasero_job_set_output_size_for_current_track

BraseroBurnURI stopping

BraseroBurnURI called brasero_job_get_action

BraseroBurnURI called brasero_job_get_session_output_size

BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_06L0SV.bin toc = none

BraseroBurnURI called brasero_job_get_session_output_size

BraseroBurnURI called brasero_job_get_action

BraseroBurnURI called brasero_job_get_current_track

BraseroBurnURI no burn:// URI found

BraseroBurnURI stopping

BraseroLocalTrack called brasero_job_get_action

BraseroLocalTrack called brasero_job_set_output_size_for_current_track

BraseroLocalTrack stopping

BraseroLocalTrack called brasero_job_get_action

BraseroLocalTrack called brasero_job_get_session_output_size

BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_JWW0SV.bin toc = none

BraseroLocalTrack called brasero_job_get_session_output_size

BraseroLocalTrack called brasero_job_get_action

BraseroLocalTrack called brasero_job_get_current_track

BraseroLocalTrack no remote URIs

BraseroLocalTrack stopping

BraseroChecksumImage called brasero_job_get_current_track

BraseroChecksumImage called brasero_job_get_action

BraseroChecksumImage called brasero_job_get_flags

BraseroChecksumImage called brasero_job_get_action

BraseroChecksumImage called brasero_job_get_fd_in

BraseroChecksumImage called brasero_job_set_output_size_for_current_track

BraseroChecksumImage stopping

BraseroChecksumImage called brasero_job_get_current_track

BraseroChecksumImage called brasero_job_get_action

BraseroChecksumImage called brasero_job_get_flags

BraseroChecksumImage called brasero_job_get_action

BraseroChecksumImage called brasero_job_get_session_output_size

BraseroChecksumImage output set (IMAGE) image = /tmp/brasero_tmp_LEU0SV.bin toc = none

BraseroChecksumImage called brasero_job_get_session_output_size

BraseroChecksumImage called brasero_job_get_action

BraseroChecksumImage called brasero_job_get_current_track

BraseroChecksumImage called brasero_job_get_input_type

BraseroChecksumImage called brasero_job_set_current_action

BraseroChecksumImage called brasero_job_get_fd_in

BraseroChecksumImage called brasero_job_get_current_track

BraseroChecksumImage Starting checksuming file /home/milan/Asztal/Mandvdiso.iso (size = 1792286720)

BraseroChecksumImage called brasero_job_get_fd_out

BraseroChecksumImage called brasero_job_get_current_track

BraseroChecksumImage Setting new checksum (type = 2) f1dc6310b2683d420e1653c219590ab9 ((null) before)

BraseroChecksumImage Finished track successfully

BraseroChecksumImage stopping

BraseroLibburn called brasero_job_get_action

BraseroLibburn unsupported operation

BraseroLibburn deactivating

BraseroLibburn called brasero_job_get_action

BraseroLibburn called brasero_job_get_device

BraseroLibburn Drive (/dev/sr0) init result = 1

BraseroLibburn called brasero_job_get_flags

BraseroLibburn called brasero_job_get_media

BraseroLibburn called brasero_job_get_fd_in

BraseroLibburn called brasero_job_get_tracks

BraseroLibburn Setting multi 0

BraseroLibburn Setting burnproof 1

BraseroLibburn Setting dummy 0

BraseroLibburn called brasero_job_get_session_output_size