Partíció megjelölése aktívként visszavonása, hogyan?

Gondolom 7 év után már nem aktuális téma, de nekem is ez volt a problémám. Kis guglizás után részletesen leírják:

follow these directions :

1. Windows +R

2. Type "cmd"

3. At the prompt type "diskpart"

4. then after the ">" symbol type " list disk"

DISKPART> list disk

Disk ### Status Size Free Dyn Gpt

-------- ---------- ------- ------- --- ---

Disk 0 Online 28 GB 1536 KB

Disk 1 Online 233 GB 993 KB

5.Now select the disk which you want to make INACTIVE (For instance if i want to make my Disk 1 as active i.e where the OS is installed and REQUIRED to boot, i need to select the drive which i want to make INACTIVE. In my example DISK 0)

DISKPART> SELECT DISK 0

Disk 0 is now the selected disk.

6. Type "list partition"

DISKPART> list partition

Partition ### Type Size Offset

------------- ---------------- ------- -------

Partition 1 Primary 28 GB 1024 KB

7. Since there is a single partition on DISK 0, select it by issuing the command "select partition 1"

DISKPART> select partition 1

Partition 1 is now the selected partition.

8.Type "inactive" - this will make disk 0 partition 1 as inactive

=============================

Explanation : This error crops up because you have been in Computer Management > Storage > Disk Management and selected more than 1 drive as ACTIVE together with the one which was already active- the one where your OS was .

Point to remember : THERE SHOULD BE ONLY ONE ACTIVE DRIVE SO YOU CANT SET MORE THAN ONE DRIVE AS ACTIVE

If this post helps to resolve your issue,Please click the Mark as Answer check mark on this page THANK YOU AND GOOD LUCK